Test Equipment: QAM, DVB-C, DVB-T, DVB-H etc. PCIe  Modulator Cards

Home >> Test Equipment >> Multi Function QPSK, QAM Annex A, B, C, DVB-C, DVB-T, DVB-H, L Band and 8VSB PCI or PCIe Transport Stream Modulators with DVB ASI or PCIe Bus TS Inputs

Frequency Agile, Field Upgradeable with Other Modes, VHF/UHF 8VSB Modulator. PCI Half-Card with RF Out on BNC Connector. Pulls Transport Streams from HD via PCI or PCIe bus or from External Devices from BNC Connector on Bracket. Both IF and RF Output Targeted at Digital Signage, STB Testing, and Laboratory Applications. Auxiliary ASI Out for Checking TS Data Flow. Ships with Windows® Based Transport Stream Player. Linux® and Windows® SDK Available for Customization. This Device can Feed Either an Antenna or Coax Cable.

Completely Frequency Agile, Field Upgradeable with any mode, MultiMode VHF/UHF/L Band 8VSB, QAM (annex A,B,C), QPSK, DVB-T+H+L, T-DMB modulator. PCI or PCIe half-card with RF out on BNC connector. Pulls transport streams from hard drive via PCI bus or from BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Both IF and RF output avail. Targeted at only Digital Signage, Private Circuit, STB Testing, and Laboratory Applications. Auxiliary ASI out for checking TS data flow. Ships with Windows XP based Transport Stream Player. Linux and Windows SDK available for customization. This device can feed either an antenna or coax cable.

Frequency agile, field Upgradeable, VHF/UHF+ L band DVB-T or DVB-H modulator. PCI half-card with transport stream input via PCI or PCIe bus and IF and RF output targeted at only Television Testing,Digital Signage, and Laboratory Applications. Supports 6, 7 or 8 MHz modes. Pulls transport streams from Hard drive via PCI bus or from BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Ships with Windows based Transport Stream Player. This device can feed either an antenna or coax cable.

Standard Features:

• Transmits real time video or stored video from the server hard drive and sends it to multiple HD monitors simultaneously
• Input: IP, DVB-ASI or SMPTE 310M transport streams via PCI bus or BNC bracket connector
• Output: 8VSB
• When ASI is input the TS can be any rate since it is upconverted and remuxed to ATSC rate
• When DVB is input the bit rate can be anything above 2 Mbps or below 19 Mbps
• Includes ASI port for simultaneous ASI and RF output if TS is pulled from hard drive
• Frequency agile
• Field upgradeable – can be reprogrammed to add QAM, QPSK, DVB-T, and I-SDBT to the card
• 44 MHz/36 MHz IF output or on board Channel 2~69 selectable RF output up-converter
• Feeds either an antenna or coax cable
• Supplied with Windows® based Transport Stream Player application
• Playout Scheduler – schedule tasks (5 maximum) to run daily, weekly or monthly at a certain time
• Includes transport stream analyzer
• Freq Config GUI supported via Windows® 2000, XP and Linux®
• Customer oriented API is also available
• Sample transport streams available
• Supports EIA 50-860 MHz Band
• ECC: Reed Solomon (204, 188, T=8) encoding
• 8VSB: 2/3 Rate Trellis Coding Conforming to ATSC A.53 specs. Symbol Rate Fixed at 10.7622 Symbol/Sec

Applications:

• Engineering labs
• In Store Demo of Plasma Televisions
• Public Space Digital billboards
• Test Equipment for RF demodulators
• Hotel and Lodging systems
  

8VSB Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Standard Features:

• DVB-ASI or SMPTE 310M input via BNC or PCI
• 44 MHz/36 MHz IF output or on board Channel 2~69 selectable RF output up-converter

  ____________________________________
  
  QAM and DVB C: DVB C and Clear Channel QAM

• ITU-T J.83 Annex A/C (DVB C) ,Annex B (USA) compliant

• QAM 16, 64,128, and 256 available under software control
  ____________________________________
  
  8VSB: 2/3 Rate Trellis Coding Conforming to ATSC A.53 specs. Symbol Rate Fixed at 10.7622 Symbol/Sec

• When ASI is input the TS can be any rate since it is upconverted and remuxed to ATSC rate

• When SMPTE 310M is input the input rate must be 19.Mbps with one video and one audio PID

• When DVB is input the bit rate can be anything above 2 Mbps or below 19 Mbps

• ASI or SMPTE 310M in via PCI
  

  
  ____________________________________
  
  DVB-T + DVB H

• 5/6/7/8 MHz channels

• Guard interval 1/4,1/8,/116,1/32

• Constellation QPSK, QAM 16, QAM 64

• 2K/4K/8K modes switchable
  ____________________________________
  
  QPSK+S2

• Full DVB S compatible

• Now supports S2

• 956-1750MHz

• QPSK, 8PSK, 16APSK, 32APSK
  ____________________________________
  
  ALL Modes: Come with config GUI supported via Win XP and Linux

• Customer oriented Linux and Windows API is also available

• CMI can supply sample transport streams

• Power output is adjustable -25 to 0dBm
  

  
  

Typical Applications customers use this for:

• In Store Demo of Plasma Televisions
• Public Space Digital billboards
• Test Equipment for RF demodulators
• Hotel and Lodging systems
  

DVB-T Main GUI (Click to enlarge)

DVB-H Main GUI (Click to enlarge)

QAM Main GUI (Click to enlarge)

DVB-S Main GUI (Click to enlarge)

DVB-S2 Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Standard Features:

• DVB-ASI (TS ) stream input from HD via PCI bus or connector on bracket.
• 54 MHz and up complete VHF/UHF RF out
• Support for L Band
• 44 MHz/36 MHz IF output or on board channel selectable RF output up-converter
• DVB H mode supports non hierarchical inputs with 2K/4K/8K modes
• Freq Config GUI supported via Win XP and Linux
• Includes sample transport streams
• Support for Win XP and Linux
• Supports 6, 7, 8 MHz Tx modes
• ETSI EN30074 V114-1 compatible
• Guard interval 1/4,1/8,/116,1/32
• Constellation QPSK, QAM 16, QAM 64
• RF Level -10 to -15 dbm
• Supports up to 45 Mbps TS rate in
• Includes multi Function Transport Stream player
• Requires 64 bit PCI bus slot
• Support for multiple cards in a single PC

   

DVB-T Main GUI (Click to enlarge)

DVB-H Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Bit Rate Calculator

Frequency agile (55-810 MHz) "US clear channel" or DVB C QAM 16/32/128/256 modulator with field upgradeability to other modes. Not compatible with SA or Motorola QAM STB's since they have proprietary signaling. PCI or PCIe half-card with transport stream input via PCI bus or external input via BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. IF and RF output targeted at only STB Testing, Digital Signage, and Laboratory Applications. Ships with Windows XP based Transport Stream Player. This device can feed either an antenna or coax cable.

Frequency agile DVB-S or S2 (QPSK) with L band out modulator with field upgradeability to other modes. PCI half-card with RF out on BNC connector. Pulls transport streams from Hard Drive via PCI or PCIe bus or from external devices via BNC on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Both IF and RF output targeted at only STB Testing and Laboratory Applications. Auxiliary ASI out for checking TS data flow. This device can feed either an antenna or coax cable.

Real time mixer for multiple VHF or UHF Modulated signals onto a single coaxial cable. These products come in combiners for 1-8 channels and are also available from Radio Shack or R.L. Drake.

Standard Features:

• Transport Streams pulled from HD via PCI bus or from external device via BNC on bracket
• 44 MHz/36 MHz IF output or on board channel selectable UHF output up-converter
• ITU-T J.83 Annex A, B, and C QAM compliant
• Can be reprogrammed to add 8VSB, QPSK, DVB T, and I-SDBT to the card
• Freq Config GUI supported via Win 2000, XP and Linux
• Supplied with Windows based Transport Stream Player application
• Playout Scheduler -- schedule tasks (5 maximum) to run daily, weekly or monthly at a certain time
• Includes transport stream analyzer
• Video viewer with zoom
• Supports up to 45 Mbps input streams
• Null Packets added automatically to adapt to selected bit rate for a particular QAM mode
• CMI can supply additional sample transport streams
• RF Level 0 dBmV
• Complies with PCI 2.1 32 bit bus
  

QAM Main GUI (Click to enlarge)

DVB-C Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Standard Features:

• Transport Streams pulled from HD via PCI bus or from external device via BNC on bracket.
• 44 MHz/36 MHz IF output or on board channel selectable RF output up-converter
• L band out (1036-1700 MHz) with Punctured Trellis Coding: Select: (1/2, 2/3, 3/4, 5/6, 7/8)
• ECC: Reed Solomon(204,188,T=8) encoding
• Can be reprogrammed to add 8VSB, QPSK, DVB T, and I-SDBT to the card
• Freq Config GUI supported via Win XP and Linux
• Supplied with Windows based Transport Stream Player application.
• Supports up to 45 Mbps input streams
• CMI can supply additional sample transport streams
• RF Level -35dBM
• Complies with PCI 2.1 32 bit bus
• support for multiple cards in a single PC
  

DVB-S Main GUI (Click to enlarge)

DVB-S2 Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Completely Frequency Agile, MultiMode VHF/UHF/L Band 8VSB, QAM (ITU J83 annex A, B, C), modulator with field upgradeability to the other modes. PCI or PCIe half-card with RF out on BNC connector. Pulls transport streams from hard drive via PCI or PCIe bus or from BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Both IF and RF output avail. Targeted at only Digital Signage, Private Circuit, STB Testing, and Laboratory Applications. Auxiliary ASI out for checking TS data flow. Ships with Windows XP based Transport Stream Player. Linux and Windows SDK available for customization. This device can feed either an antenna or coax cable.

Completely Frequency Agile, MultiMode VHF/UHF QAM (annex A, B, C), DVB-T+H+L band modulator with field upgradeability to support the other modes. PCI or PCIe half-card with RF out on BNC connector. Pulls transport streams from hard drive via PCI or PCIe bus or from BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Both IF and RF output avail. Targeted at only Digital Signage, Private Circuit, STB Testing, and Laboratory Applications. Auxiliary ASI out for checking TS data flow. Ships with Windows XP based Transport Stream Player. Linux and Windows SDK available for customization. This device can feed either an antenna or coax cable.

Completely Frequency Agile, MultiMode VHF/UHF/L Band 8VSB, QAM (annex A, B, C), DVB-T+H+L, T-DMB modulator with field upgradeability to other modes. PCI or PCIe half-card with RF out on BNC connector. Pulls transport streams from hard drive via PCI or PCIe bus or from BNC connector on bracket. Includes ASI port for simultaneous ASI and RF out if TS is pulled from HD. Both IF and RF output avail. Targeted at only Digital Signage, Private Circuit, STB Testing, and Laboratory Applications. Auxiliary ASI out for checking TS data flow. Ships with Windows XP based Transport Stream Player. Linux and Windows SDK available for customization. This device can feed either an antenna or coax cable.

Standard Features:

• Transport Streams pulled from HD via PCI bus or from external device via BNC on bracket
• 44 MHz/36 MHz IF output or on board channel selectable VHF /UHF output up-converter
  ____________________________________
  
  8VSB: 2/3 Rate Trellis Coding Conforming to ATSC A.53 specs. Symbol Rate Fixed at 10.7622 Symbol/Sec
• When ASI is input the TS can be any rate since it is upconverted and remuxed to ATSC rate
• When SMPTE 310M is input the input rate must be 19.Mbps with one video and one audio PID

• When DVB is input the bit rate can be anything above 2 Mbps or below 19 Mbps

• ASI or SMPTE 310M in via PCI
  ____________________________________
  
  QAM and DVB C: DVB C and Clear Channel QAM

• ITU-T J.83 Annex A, B, and C QAM compliant and compliant with DVB T and DVB H
• QAM 16,64,128, and 256 avail under software control
  ____________________________________
  
• Freq Config GUI supported via Win XP and Linux
• Supplied with Windows based Transport Stream Player application.
• Supports up to 45 Mbps input streams
• Null Packets added automatically to adapt to selected bit rate for a particular QAM mode
• CMI can supply additional sample transport streams
• RF Level 0dBmV
• Complies with PCI 2.1 32 bit bus
  

8VSB Main GUI (Click to enlarge)

QAM Main GUI (Click to enlarge)

DVB-C Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Standard Features:

• Transport Streams pulled from HD via PCI bus or from external device via BNC on bracket
• 44 MHz/36 MHz IF output or on board channel selectable VHF /UHF output up-converter
  

  ____________________________________
  
  DVB-T + DVB H

• 5/6/7/8 MHz channels

• Guard interval 1/4,1/8,/116,1/32

• Constellation QPSK, QAM 16, QAM 64

• 2K/4K/8K modes switchable

  ____________________________________
  
  QAM and DVB C:

• ITU-T J.83 Annex A, B, and C QAM compliant and compliant with DVB T and DVB H

• QAM 16,64,128, and 256 avail under software control
  ____________________________________
  

• Freq Config GUI supported via Win XP and Linux
• Supplied with Windows based Transport Stream Player application.
• Supports up to 45 Mbps input streams
• Null Packets added automatically to adapt to selected bit rate for a particular QAM mode
• CMI can supply additional sample transport streams
• RF Level 0dBmV
• Complies with PCI 2.1 32 bit bus
  
  

QAM Main GUI (Click to enlarge)

DVB-C Main GUI (Click to enlarge)

DVB-T Main GUI (Click to enlarge)

DVB-H Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Standard Features:

• Transport Streams pulled from HD via PCI bus or from external device via BNC on bracket
• DVB-ASI input via BNC or PCI
• 44 MHz/36 MHz IF output or on board Channel 2~69 selectable RF output up-converter

  ____________________________________
  
  QAM and DVB C: DVB C and Clear Channel QAM

• ITU-T J.83 Annex A/C (DVB C) ,Annex B (USA) compliant

• QAM 16,64,128, and 256 avail under software control

  
  ____________________________________
  
  8VSB: 2/3 Rate Trellis Coding Conforming to ATSC A.53 specs. Symbol Rate Fixed at 10.7622 Symbol/Sec

• When ASI is input the TS can be any rate since it is upconverted and remuxed to ATSC rate

• When SMPTE 310M is input the input rate must be 19.Mbps with one video and one audio PID

• When DVB is input the bit rate can be anything above 2 Mbps or below 19 Mbps

• ASI or SMPTE 310M in via PCI
  ____________________________________
  
  DVB-T + DVB H

• 5/6/7/8 MHz channels

• Guard interval 1/4,1/8,/116,1/32

• Constellation QPSK, QAM 16, QAM 64

• 2K/4K/8K modes switchable

  
  

QAM Main GUI (Click to enlarge)

DVB-C Main GUI (Click to enlarge)

DVB-T Main GUI (Click to enlarge)

8VSB Main GUI (Click to enlarge)

DVB-H Main GUI (Click to enlarge)

Schedule Task (Click to enlarge) 

SI Table (Click to enlarge)

Each modulator card can be licensed for
additional profiles upon payment of a license fee... Any card can have one, a few, or many profiles.

Profiles available are:

QAM, DVB-C, QPSK, DVB S, DVB-S2, 8VSB, T-DMB, DVB T+H, ISDB-T