Full Duplex, Redundant Output, Single or Dual Input, DVB-ASI PCI Express Send and Receive Interface Card with Accurate Clock, Jitter Management, Packet Arrival Timestamping, Unlimited PID Filtering, Secondary Input via Header, and Failover Relay. Optional (2.5 PPM) High Stability Oscillator.
Standard Features:
270 Mbits/sec DVB ASI transmitter and receiver on one card
Two DVB ASI inputs; secondary input via header
A/B input selection is software controlled
Two buffered ASI outputs
Optional dual DVB-ASI Inputs
Drivers for Windows® 7 – 32 and 64 bit, Server 2003, Server 2008, Windows® 2000, Windows® XP, and Linux®
Windows® XP/Server 2003/Server 2008/Linux® API
DirectShow® filter
Single Lane PCI Express interface
Signal quality sensing support in hardware
External clock input via NTSC or PAL black burst signal
Firmware controlled support for bypass mode
“Snoop” function allows access to input data while in bypass mode
Control Interface port
6 GPI optically isolated inputs
External override input for the mechanical bypass relay
Status output for firmware loop back
LED Status for TX, Rex, Sync, and Carrier
One general purpose control output
Watchdog timer based on a 40 MHz 32-bit counter
Silicon serial number
Firmware is field upgrade able
Software selectable transmit clock source
Support for SMPTE 325
Accurate 25 PPM clock – standard
Automatic Null Packet Insertion
Scatter Gather DMA
Hardware PID Filtering
Packet arrival Time Stamping
Jitter Management
Compliant with DVB Standard A010 Rev1 and EN 50083
Mechanical relay bypasses primary input to primary output on power failure
Optional High Stability Oscillator with less than 2.5 pm drift, meeting ATSC specifications
Patent pending on key architecture
Applications:
Video servers
Data casting and monitoring
Electronic Program Guides (EPG's)
Interface DVB MPEG-2 transport streams to the PCI bus
