Hospitality

Hotel TV on the wiring you already have

Channels come in by satellite, off-air RF or IP and go out to the rooms as QAM or 8VSB channels on coax, or as UDP multicast on the hotel LAN. T-Ramp receives the satellite channels, Apollo puts HDMI house channels onto coax, and Brutus builds the multicast lineup.

  • QAM
  • 8VSB
  • DVB-C
  • UDP multicast
  • HDMI
  • DVB-S/S2
  • H.264
  • MPEG-2
IPTV multicast: satellite, off-air, SDI and IP sources are encoded by Brutus into one UDP multicast group per channel; IGMP switches forward each group only to the ports where a set-top box, IPTV TV or PC player has joined, and CTDK and DOZER SRT add ASI sources and remote sites to the same network. In parallel, Apollo encodes HDMI sources and modulates them to QAM or 8VSB on the coax plant for TVs with built-in tuners.IP LAN1SOURCESHeadend feedsSatellite, off-air,SDI, SRTHDMI sourcesSignage, studios2ENCODE TO MULTICASTBrutusUDP multicast3IGMP NETWORK239.1.1.1239.1.1.3IGMP switchSnooping, querier4RF MODULATIONHDMIApolloHDMI to QAM, 8VSB5SCREENSUDPIGMP JOINQAM, 8VSBSet-top boxJoined CH 1IPTV TVJoined CH 2PC playerJoined CH 3TVs on coaxBuilt-in tunerHDMIRFIPDELIVERYCONTROLDVEO PRODUCTTHIRD PARTY
List price, Apollo HDMI to QAM or 8VSB, 1 channel
$1,095
Apollo RF output range
30 to 960MHz
IP output streams per T-Ramp satellite IRD
32

Your signal chain

Satellite, RF or IP in, coax or LAN out to every room

Channels come into the headend by satellite, off-air RF or IP. House channels, such as a welcome channel, event schedules and promotions, come from HDMI players and PCs. Everything goes out to the rooms either as QAM or 8VSB channels on the coax plant, for the TVs already installed, or as UDP multicast on the hotel LAN, for IPTV set-top boxes and IPTV-capable TVs.

T-Ramp receives DVB-S/S2 channels, with BISS and CAM slots, and re-multiplexes them to IP or ASI. Apollo encodes HDMI house channels to MPEG-2 or H.264 and modulates them to QAM (DVB-C) or 8VSB anywhere from 30 to 960 MHz, with logical channel numbers. Brutus builds the multicast lineup for the LAN, one stream per channel however many rooms tune in. DVEO Channel Manager adds logos and crawls to house channels, and DOZER SRT shares one headend across buildings or properties.

The coax and the TVs are installed, and replacing them takes rooms out of service. Engineering is often one person or an outside integrator, so the system has to run without daily attention. Through DVEO's partnership with StreamVX, hotel IPTV projects can add multi-tenancy and mass-channel manifest manipulation on top of DVEO hardware, delivered as one project with one support contact (read the May 2026 DVEO and StreamVX announcement).

Workflows

Hospitality workflows DVEO covers

Recommended products

Equipment for a property headend

DVEO APOLLO HDMI TO QAM, front panel close-up illustrationAPOLLOHDMI TO QAMPWRENCRFHDMI INUSBQAM OUT

HDMI to QAM or 8VSB

Apollo

1 or 4 channel MPEG-2 or H.264 encoder and modulator, 30 to 960 MHz, LCN, USB recording and playback of .ts files.

List price from $1,095

DVEO BRUTUS MULTICAST, front panel close-up illustrationBRUTUSMULTICASTPWRSYSNETGBE123410GUSBBRUTUSSYSTEM OK

Multicast IPTV headend

Brutus

Satellite, off-air, SDI and IP sources to UDP multicast in H.264, H.265 or MPEG-2, managed from one web UI.

Price on request

DVEO T-RAMP DVB-S/S2 IRD, front panel close-up illustrationT-RAMPDVB-S/S2 IRDRF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK

DVB-S/S2 IRD

T-Ramp

Satellite reception with BISS and CAM slots, re-multiplexing to IP or ASI, up to 32 IP outputs.

List price from $2,995

DVEO CHANNEL MANAGER BOX, front panel close-up illustrationCHANNEL MANAGERBOXSDI INSDI OUTCH MGRON AIR

House channel graphics

DVEO Channel Manager

Logos, text overlays, crawls and L-banners, scheduled by date and time or started by hand.

List price from $2,995

DVEO DOZER SRT BOX 10CH, front panel close-up illustrationDOZER SRTBOX 10CHGBE12

Links between sites

DOZER SRT

Carries the lineup between buildings or properties over the internet, AES-128, multicast out.

List price from $1,995

DVEO CTDK ASI / IP, front panel close-up illustrationCTDKASI / IPPWRASIIPASI INASI OUTIP

ASI to IP

CTDK

Puts ASI from existing receivers and loop players onto the IP network with IGMPv2/v3.

List price from $1,795

Why DVEO

Built for properties and their integrators

  1. Keep the TVs

    QAM and 8VSB modulation reaches the TVs already in the rooms.

  2. LAN-friendly IPTV

    Multicast keeps one stream per channel on the hotel network.

  3. Satellite in, both plants out

    T-Ramp outputs up to 32 IP streams, or ASI, from DVB-S/S2 feeds.

  4. Written quotes

    Ask for a quote on Apollo, T-Ramp or Channel Manager Box and DVEO replies in writing with the price, the lead time and shipping.

  5. Support after install

    One-year warranty on every product. DVCare adds 1 to 4 years with advance replacement units shipped within 24 hours.

FAQ

Questions from hotels and integrators

If the TVs tune QAM or ATSC channels on coax, yes. Apollo creates QAM (DVB-C) or 8VSB channels they already receive. For IPTV over the LAN, rooms need IPTV set-top boxes or TVs that receive multicast IPTV.

Each Apollo 1CH adds one channel and each 4CH adds four. Apollo outputs anywhere from 30 to 960 MHz, so the new channels can sit in unused frequencies on your plant.

Apollo records and plays back .ts files from a USB flash drive, so a promo or info file can play from the modulator itself. Loop Source also plays transport streams continuously from a flash card to ASI.

Yes. DVEO works with installers and resellers, including an installer network across North America for hospitality projects. Ask us for a partner in your region.

Plan the property headend

Tell us the room count, the TV models, whether the rooms are on coax, the LAN or both, and the channels you need. We will design the headend.