IPTV and RF distribution

IPTV over UDP multicast and RF over QAM and 8VSB

Brutus encodes each channel once and sends it as UDP multicast, so a hotel LAN, a campus network or an access network carries one copy per channel however many receivers join. Where the screens hang off coax, Apollo modulates HDMI sources to QAM or 8VSB for the TVs already installed.

  • UDP multicast
  • IGMP
  • SPTS
  • MPTS
  • QAM
  • 8VSB
  • DVB-C
  • H.264
DVEO APOLLO HDMI TO QAM, three-quarter view illustrationAPOLLOHDMI TO QAMPWRENCRFHDMI INUSBQAM OUT
List price, Apollo HDMI to QAM or 8VSB, 1 channel
$1,095
Apollo RF output range
30 to 960MHz
IP outputs from one ASI transport stream on CTDK
7
Multicast or unicast IP outputs per T-Ramp IRD
32

Two delivery paths

Multicast for networks, RF for coax

Unicast IPTV sends a separate copy of a channel to every viewer, which a building network or access network cannot carry at scale. IP multicast sends one stream per channel, and IGMP-aware switches forward it only to the ports where a receiver has joined. That is how hotels, campuses, enterprises and ISPs carry many live channels over the same network that carries their data.

Brutus converts each source, whether satellite, off-air, cable, SDI or an IP feed, into a multicast UDP stream in H.264, H.265 or MPEG-2, SPTS or MPTS, with 608/708 closed captions, DVB subtitles and teletext, and manages every channel from one interface. Set-top boxes and IPTV-capable TVs join the groups they need.

Many properties still run coax to every room, with TVs that tune QAM or ATSC. Apollo encodes an HDMI or analog source to MPEG-2 or H.264 and modulates it to QAM (DVB-C) or 8VSB anywhere from 30 to 960 MHz, with logical channel numbers, so a welcome channel, an events schedule or a signage feed appears as a channel on every existing TV.

Signal path

From headend to every screen

Two delivery paths from one headend: multicast over the IP network, and RF channels on the coax plant.

IPTV multicast: satellite, off-air, SDI and IP sources are encoded by Brutus into one UDP multicast group per channel; IGMP switches forward each group only to the ports where a set-top box, IPTV TV or PC player has joined, and CTDK and DOZER SRT add ASI sources and remote sites to the same network. In parallel, Apollo encodes HDMI sources and modulates them to QAM or 8VSB on the coax plant for TVs with built-in tuners.IP LAN1SOURCESHeadend feedsSatellite, off-air,SDI, SRTHDMI sourcesSignage, studios2ENCODE TO MULTICASTBrutusUDP multicast3IGMP NETWORK239.1.1.1239.1.1.3IGMP switchSnooping, querier4RF MODULATIONHDMIApolloHDMI to QAM, 8VSB5SCREENSUDPIGMP JOINQAM, 8VSBSet-top boxJoined CH 1IPTV TVJoined CH 2PC playerJoined CH 3TVs on coaxBuilt-in tunerHDMIRFIPDELIVERYCONTROLDVEO PRODUCTTHIRD PARTY
Satellite, off-air, SDI and HDMI sources are encoded by Brutus to UDP multicast and carried over an IGMP network to set-top boxes and IPTV TVs, while Apollo modulates HDMI sources to QAM or 8VSB on coax for existing TVs.
  1. Stage 1: Sources

    Satellite and off-air channels from T-Ramp or Brutus RF inputs, SDI and HDMI from local studios and signage players, and IP feeds over SRT.

  2. Stage 2: Encode to multicast

    Brutus encodes or transcodes each channel to H.264, H.265 or MPEG-2 and sends it as a UDP multicast group, SPTS or MPTS.

  3. Stage 3: IGMP network

    Your switches forward each multicast group only to ports where a receiver has joined, so the network carries one copy per channel. CTDK and DOZER SRT add ASI sources and remote sites to the same multicast network.

  4. Stage 4: RF modulation

    Apollo encodes HDMI or analog sources and modulates them to QAM (DVB-C) or 8VSB for the coax plant.

  5. Stage 5: Screens

    Set-top boxes and IPTV TVs join multicast groups on the LAN. TVs on coax tune the QAM or 8VSB channels.

Capabilities

Distribution over IP and RF

  • Load that does not grow with viewers

    One multicast stream per channel serves every receiver that joins, instead of one unicast copy per viewer.

  • A codec for each network

    H.264 or H.265 for IPTV set-top boxes and MPEG-2 for older receivers, as single or multiple program transport streams.

  • QAM and 8VSB onto coax

    Apollo modulates to QAM (DVB-C) or 8VSB from 30 to 960 MHz, with MER of 42 dB or better and logical channel numbers.

  • HDMI and analog in

    Apollo takes HDMI, YPbPr or composite video up to 1080p, for signage players, PCs and local feeds.

  • ASI to multicast

    CTDK turns one ASI transport stream into as many as seven IP outputs over UDP or RTP, with IGMPv2/v3 and Pro-MPEG FEC.

  • Satellite to multicast

    T-Ramp receives DVB-S/S2, descrambles BISS or CAM protected services and outputs up to 32 unicast or multicast IP streams.

  • Captions and subtitles

    608/708 closed captions, DVB subtitles and teletext carried through to the set-top box.

  • Remote buildings over SRT

    DOZER SRT carries channels between buildings or properties over the internet and outputs UDP multicast at the far end.

  • Central management

    Monitor and control every multicast channel from the Brutus web interface or REST API.

What you need

Products for IPTV and RF distribution

Brutus builds the multicast lineup and Apollo puts channels on coax. T-Ramp, CTDK, DOZER SRT and Loop Source feed the headend.

DVEO BRUTUS MULTICAST, front panel close-up illustrationBRUTUSMULTICASTPWRSYSNETGBE123410GUSBBRUTUSSYSTEM OK

Multicast encoder and transcoder

Brutus

Satellite, off-air, cable, SDI or IP sources to UDP multicast in H.264, H.265 or MPEG-2, SPTS or MPTS.

Price on request

DVEO APOLLO HDMI TO QAM, front panel close-up illustrationAPOLLOHDMI TO QAMPWRENCRFHDMI INUSBQAM OUT

HDMI to QAM or 8VSB

Apollo

MPEG-2 or H.264 encoder and modulator with 1 or 4 channels, 30 to 960 MHz, LCN support and USB recording and playback of .ts files.

List price from $1,095

DVEO T-RAMP DVB-S/S2 IRD, front panel close-up illustrationT-RAMPDVB-S/S2 IRDRF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK

DVB-S/S2 IRD

T-Ramp

BISS-1 and BISS-E, two CI slots, re-multiplexing to IP or ASI, up to 32 IP output streams and a maximum IP output bit rate of 70 Mbps.

List price from $2,995

DVEO CTDK ASI / IP, front panel close-up illustrationCTDKASI / IPPWRASIIPASI INASI OUTIP

ASI to IP and IP to ASI

CTDK

Puts ASI transport streams onto the multicast network with IGMPv2/v3, UDP or RTP and Pro-MPEG FEC.

List price from $1,795

DVEO DOZER SRT BOX 10CH, front panel close-up illustrationDOZER SRTBOX 10CHGBE12

SRT links between sites

DOZER SRT

Carries channels between buildings or properties over the internet, AES-128 encrypted, with UDP multicast out.

List price from $1,995

DVEO LOOP SOURCE TS TO ASI, front panel close-up illustrationLOOP SOURCETS TO ASICF CARDASI OUT

Loop playout to ASI

Loop Source

Plays an info or emergency channel continuously from a flash card to DVB-ASI. Pair it with CTDK to put the loop on the multicast network.

List price from $1,700

Apollo models

QAM and 8VSB modulator encoders

All Apollo models encode MPEG-2 or H.264 at up to 1080p and output RF from 30 to 960 MHz.

QAM and 8VSB modulator encoders
ModelRF outputChannelsList price (USD)
Apollo HDMI to QAM 1CHQAM (DVB-C)1$1,095
Apollo HDMI to 8VSB 1CH8VSB1$1,095
Apollo HDMI to QAM 4CHQAM (DVB-C)4$5,495
Apollo HDMI to 8VSB 4CH8VSB4$5,495

Apollo lists HDMI, YPbPr and composite (CVBS) inputs and MPEG-1 Layer II, MPEG-2 AAC and MPEG-4 AAC audio, with Dolby Digital AC-3 as an option. Request a quote with your channel count.

FAQ

IPTV and RF distribution questions

Not if the TVs are on coax. Apollo creates QAM or 8VSB channels that existing TVs already tune. For multicast IPTV over the LAN, each screen needs a set-top box or a TV that receives IPTV.

The 1CH models encode and modulate one source and the 4CH models four. Apollo outputs anywhere from 30 to 960 MHz, so the new channels can go into unused frequencies on your plant.

Switches with IGMP snooping and an IGMP querier, so each multicast group reaches only the ports that joined it. We review the network design with you before deployment.

Yes. Local channels from SDI, HDMI or file sources join the same lineup, as multicast groups on the network or as QAM or 8VSB channels on coax, alongside the channels received from satellite and off-air.

From the DVEO blog

Further reading

All news and articles

Plan your channel lineup

Tell us the sources, the number of channels and whether the screens are on coax, on the LAN or both. We will design the headend.