Integrated receiver decoder

T-Ramp

Receive, descramble and re-multiplex satellite feeds

DVB-S/S2 in; MPEG-2 and H.264 HD or SD services out on ASI or as up to 32 unicast or multicast IP streams, with a maximum IP output bit rate of 70 Mbps. BISS 1, BISS-E and two CI slots for CAMs descramble the services in the same unit, so they leave T-Ramp ready for the headend.

List price from $2,995

List price in USD. Request a quote for configuration, volume and shipping.

  • DVB-S/S2
  • MPEG-2
  • H.264
  • BISS-E
  • CAM
  • ASI
  • Multicast
  • SDI
DVEO T-RAMP DVB-S/S2, three-quarter view illustrationT-RAMPDVB-S/S2PWRLOCKNETRF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK
unicast or multicast IP output streams
32
maximum IP output bit rate
70Mbps
CI slots, each for a CAM of up to 4 services
2

Overview

The receive end of the headend

T-Ramp sits where satellite feeds enter a headend. It receives and decodes MPEG-2 or H.264 services in HD or SD, descrambles them with BISS or a CAM, and restructures the transport stream with its built-in re-multiplexer before it moves on over IP or ASI.

Operators use it for satellite contribution and distribution feeds, for cable and IPTV headends that push many IP streams downstream, for ASI to IP and IP to ASI conversion inside an existing chain, and for transport stream monitoring. Dynamic PMT detection keeps it current when stream parameters change.

For satellite channels that have to reach OTT players as HLS or DASH, the Brutus DVB-S/S2 to IP version transcodes them instead. See the Brutus versions.

Where it fits

From dish to IP and ASI

T-Ramp takes a satellite multiplex in and hands clean services to the rest of the headend.

RF to IP: a satellite dish, an off-air antenna and a cable feed bring DVB-S/S2, ATSC, DVB-T/T2 and QAM into a T-Ramp IRD and Brutus RF tuners, which demodulate full transport streams; programs are selected and remapped with their EPG, captions and audio, Brutus transcodes them to H.264 or H.265, and the channels leave as UDP or RTP multicast, HLS and DASH, and RTMP or SRT.1RF INDish, LNBDVB-S/S2AntennaATSC, DVB-T/T2Cable feedQAM2DEMODULATEL-BANDT-Ramp IRDBISS, CAM descrambleBrutus RFTuner inputs3SELECT AND MAPMPTSTSProgram mapPIDs, EPG,captions, audio4TRANSCODESPTSBrutusH.264, H.2655DELIVER OVER IPUDP MULTICASTHLS, DASHSRT, RTMPSet-top boxesUDP, RTP multicastApps, playersHLS, DASHPartners, cloudRTMP, SRTRFIPDELIVERYDVEO PRODUCTSERVICETHIRD PARTY
A DVB-S/S2 feed enters T-Ramp, which decodes, descrambles and re-multiplexes the services and outputs them as IP streams or ASI. The RF to IP solution shows the full workflow.
  1. Stage 1: RF in

    A DVB-S or DVB-S2 satellite feed from the dish, carrying contribution or distribution services.

  2. Stage 2: Demodulate

    T-Ramp descrambles services with BISS 1, BISS-E or a CAM in one of two CI slots, and decodes MPEG-2 or H.264 in HD or SD.

  3. Stage 3: Select and map

    The built-in re-multiplexer restructures the transport stream around the services you need. Dynamic PMT detection tracks changes.

  4. Stage 4: Transcode

    For OTT players that need HLS or DASH, Brutus transcodes the services to H.264 or H.265.

  5. Stage 5: Deliver over IP

    Up to 32 unicast or multicast IP streams, with a maximum IP output bit rate of 70 Mbps, or the re-multiplexed stream on ASI.

Features

A professional receive chain in one unit

Reception, conditional access, re-multiplexing and data services.

DVB-S/S2 reception
Receives satellite services and decodes MPEG-2 and H.264 in HD and SD.
BISS descrambling
BISS 1 and BISS-E built in.
CAM support
Two CI slots, each for a CAM of up to 4 services: Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viaccess and more.
Built-in re-multiplexer
Restructures transport streams for IP or ASI output.
32 IP outputs
Up to 32 unicast or multicast IP streams, with a maximum IP output bit rate of 70 Mbps.
ASI and IP conversion
Works as an ASI to IP and IP to ASI converter.
Subtitles and captions
VBI teletext, EBU/DVB subtitles, WSS and closed captions.
HD to SD down conversion
Converts HD input to SD output; PAL, NTSC and SECAM.
Web GUI and LCD
Remote configuration in a browser, local control on the front panel.

Models

T-Ramp models

Two models by reception standard. For the ATSC model, request a quote and sales confirms availability.

  • Available
    DVEO T-RAMP DVB-S/S2, front panel close-up illustrationT-RAMPDVB-S/S2RF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK

    T-Ramp DVB-S/S2

    Satellite IRD with re-multiplexing

    List price$2,995USD

    • DVB-S and DVB-S2 satellite reception
    • BISS and CAM descrambling
    • IP or ASI re-multiplexing
  • Quote only
    DVEO T-RAMP ATSC, front panel close-up illustrationT-RAMPATSCATSC INCI SLOTS12ATSC 8VSBSIGNAL LOCK

    T-Ramp ATSC

    Terrestrial IRD for off-air reception

    Price on requestSend inputs, outputs, codecs and channel count for a quote.

    • Off-air ATSC reception
    • Ask sales about availability and price

Compare models

Model comparison
SpecT-Ramp DVB-S/S2T-Ramp ATSC
ReceptionDVB-S and DVB-S2 satelliteATSC off-air
ChannelsUp to 32 IP output streamsNot listed
List price (USD)$2,995Request a quote

Ask us about rack size and mounting.

Specifications

T-Ramp specifications

Inputs

RFDVB-S/S2; ATSC on the ATSC model (ask sales about availability)

Outputs

IPUp to 32 unicast or multicast streams; maximum IP output bit rate 70 Mbps
ASIRe-multiplexed transport streams
ConversionASI to IP and IP to ASI

Video

DecodeMPEG-2, H.264, HD and SD
Down conversionHD to SD
StandardsPAL, NTSC, SECAM
DataVBI teletext, EBU/DVB subtitles, WSS, closed captions

Transport and protocols

Re-multiplexingBuilt in, to IP or ASI
PMTDynamic PMT detection
BISSBISS 1, BISS-E
Conditional access2 CI slots, each for a CAM of up to 4 services
CASConax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viaccess and more

Control and management

RemoteWeb GUI
LocalLCD front panel controls

Physical

Interfaces listedDVB-S/S2, ASI, IP, SDI, HDMI

Warranty

StandardOne year on every DVEO product
DVCareExtended warranty for 1 to 4 years: priority phone and email support, advance replacement units shipped within 24 hours, firmware notifications with release notes
RepairsEmail rma@dveo.com (or info@dveo.com) for an RMA number; repaired units usually return within a week unless parts are short

FAQ

T-Ramp questions

Yes. The built-in re-multiplexer outputs to IP or ASI, and T-Ramp also works as an ASI to IP and IP to ASI converter.

Up to 32 separate unicast or multicast IP streams, with a maximum IP output bit rate of 70 Mbps.

BISS 1 and BISS-E are built in. Two CI slots take CAMs for Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viaccess and more.

An ATSC model is listed but currently unavailable, so ask sales about availability. To bring ATSC, QAM, DVB-T or DVB-T2 channels to OTT as HLS or DASH, use the Brutus RF to IP versions.

Through a web GUI for remote configuration, and an LCD front panel for local control.

After the sale

How support works

  • One-year warranty

    Every DVEO product carries a one-year warranty.

  • DVCare, 1 to 4 years

    Extended warranty with priority phone and email support, advance replacement units shipped within 24 hours and firmware notifications with release notes.

  • Repairs and RMA

    Email rma@dveo.com (or info@dveo.com) for an RMA number and ship the unit to San Diego. Repairs usually come back within a week unless parts are short.

  • Spare parts

    Spare parts are available for DVEO products. Ask for the part with the model and serial number.

Plan your satellite receive chain

Send the satellites, services and conditional access you receive, and where the streams need to go.