SRT gateways

DOZER SRT

Live video over the internet, lost packets recovered

UDP unicast or multicast in, SRT out with AES-128 and back to UDP at the far end, 10 to 100 channels per unit. DOZER recovers lost packets, absorbs jitter and reorders packets, so live video can cross the public internet in place of satellite links and leased lines.

List price from $1,995

List price in USD. Request a quote for configuration, volume and shipping.

  • SRT
  • Caller
  • Listener
  • UDP unicast
  • UDP multicast
  • AES-128
  • MPEG-TS
DVEO DOZER SRT RACK 100CH, three-quarter view illustrationDOZER SRTRACK 100CHPWRSRTNETGBE1234
SRT channels on the Rack 100ch and Telco 100ch
100ch
encryption between DOZER units
AES-128
models, $1,995 to $4,995 list
4
Technology and Engineering Emmy from NATAS for DOZER ARQ, the error-correcting transport DOZER started with
2018Emmy

Overview

Where DOZER SRT sits

DOZER SRT works at both ends of an IP link. At the source it takes UDP from an encoder and sends it as SRT. At the far end it recovers lost packets, reorders them, absorbs jitter and hands clean UDP unicast or multicast to a headend, an affiliate or a decoder.

Each unit can be a sender, a receiver or both, point-to-point or point-to-multipoint, so one hub can feed many affiliates. DOZER forwards every packet without examining the transport stream, which means it carries whatever your encoders produce.

DOZER suits CDN operators, mobile network operators and broadcasters. It can replace satellite backhaul and leased point-to-point lines, back up dedicated IP links over the public internet, including studio-to-transmitter links, and carry live news and sports over congested wired or wireless networks. DOZER works with other vendors' SRT devices, so the receiver can sit behind an encoder that is not DVEO's.

Where it fits

A DOZER link, end to end

Two DOZER units turn an unmanaged IP path into a recovered, encrypted transport for live video.

SRT transport: a camera feeds Premio, or any encoder with UDP output feeds the sending DOZER SRT, which runs as the SRT caller and carries the stream over the public internet with AES-128 encryption and retransmission of lost packets to the receiving DOZER SRT listener at the studio. The listener hands off UDP to the headend network, to D-Streamer for SDI, or to Brutus to continue as SRT or HLS.VENUEPUBLIC INTERNETSTUDIO, HEADEND1ENCODE AT THE SOURCESDICameraSDIPremioSDI to IPAny encoderUDP output2DOZER SENDSOVER SRTUDPUDPDOZER SRTSenderCALLER3PUBLIC INTERNETSRTAES-128LOST PACKETS RESENTLOSS REPORTS4DOZERRECEIVESLISTENERPORTDOZER SRTReceiverLISTENER5HAND OFF OVER UDPUDPUDPUDPSDIHeadend LANUDP multicastD-StreamerIP to SDIBrutusTranscodeSwitcherSDIOnwardSRT, HLSSDIIPDELIVERYCONTROLDVEO PRODUCTTHIRD PARTY
An encoder hands UDP to the DOZER sender, SRT crosses the internet or a private WAN, and the DOZER receiver delivers clean UDP unicast or multicast to the headend or affiliates. The SRT transport solution shows the full workflow.
  1. Stage 1: Encode at the source

    Any encoder with UDP output feeds the DOZER sender: Premio, Brutus or another vendor's.

  2. Stage 2: DOZER sends over SRT

    The DOZER sender carries each stream over SRT with AES-128, as caller or listener, without examining the transport stream.

  3. Stage 3: Public internet

    SRT crosses the public internet, a private WAN, Metro WDM or wireless links, where packets are lost, delayed and reordered.

  4. Stage 4: DOZER receives

    The DOZER receiver recovers lost packets, absorbs jitter and restores packet order, behind a listener port your firewall allows.

  5. Stage 5: Hand off over UDP

    Clean UDP unicast or multicast to the headend, an affiliate or a decoder such as D-Streamer.

Features

Built for contribution and distribution links

Every DOZER SRT model has the same transport feature set.

Packet loss recovery
Corrects packet loss, jitter and packet reordering on wired and wireless IP links.
AES-128 encryption
Traffic between DOZER units is encrypted with AES-128.
Firewall traversal
SRT caller and listener modes, with a configurable destination port on the listener.
Point to multipoint
Feed many affiliates from one hub. Each receiver can also output UDP to several local devices from its second Ethernet port.
Sender, receiver or both
Set each unit for its role, with UDP unicast and multicast in or out.
Transparent forwarding
DOZER forwards all packets without examining the transport stream, so any bitstream passes.
Address remapping
IP addresses and ports can be remapped to fit the remote network.
Works with other SRT gear
Interoperates with other vendors' SRT-equipped encoders, decoders and gateways.
Linux container option
DOZER is also available as a Linux container for deployment on your own servers.

Models

Four DOZER SRT models

Same SRT engine and features in every model. Choose by channel count and power.

  • Available
    DVEO DOZER SRT BOX 10CH, front panel close-up illustrationDOZER SRTBOX 10CHGBE12

    DOZER SRT Box 10ch

    SRT gateway in a box for 10 channels

    List price$1,995USD

    • 10 SRT channels
    • 2 GigE ports, 4 Ethernet optional
    • Sender, receiver or both
  • Available
    DVEO DOZER SRT RACK 25CH, front panel close-up illustrationDOZER SRTRACK 25CHGBE1234

    DOZER SRT Rack 25ch

    Rack-mount SRT gateway for 25 channels

    List price$2,495USD

    • 25 SRT channels
    • Hub to affiliate distribution
    • 2 GigE ports, 4 Ethernet optional
  • Available
    DVEO DOZER SRT RACK 100CH, front panel close-up illustrationDOZER SRTRACK 100CHGBE1234

    DOZER SRT Rack 100ch

    Rack-mount SRT gateway for 100 channels

    List price$3,495USD

    • 100 SRT channels
    • Large hub distribution
    • 2 GigE ports, 4 Ethernet optional
  • Available
    DVEO DOZER SRT TELCO 100CH, front panel close-up illustrationDOZER SRTTELCO 100CHDUAL PSUPSU1PSU2GBE1234

    DOZER SRT Telco 100ch

    100 channel SRT gateway with redundant power

    List price$4,995USD

    • 100 SRT channels
    • Redundant power
    • 2 GigE ports, 4 Ethernet optional

Compare models

Model comparison
SpecBox 10chRack 25chRack 100chTelco 100ch
Channels1025100100
Form factorBoxRack mountRack mountRack mount, redundant power
List price (USD)$1,995$2,495$3,495$4,995

All models: 2 GigE ports, 4 Ethernet optional; AES-128 encryption. Clearance and refurbished DOZER units are on the Clearance page.

Specifications

DOZER SRT specifications

Inputs

IPUDP unicast and multicast; SRT from another DOZER or SRT device
PayloadAny bitstream: MPEG-2, H.264, H.265, data, compressed or uncompressed video, audio

Outputs

IPSRT to remote units; UDP unicast and multicast at the receiver
Local outputUDP to several devices from the second Ethernet port

Transport and protocols

ProtocolSRT, caller and listener modes
Error handlingPacket loss correction, jitter correction, packet reordering
EncryptionAES-128 between units
TopologyPoint-to-point or point-to-multipoint; sender, receiver or both
ForwardingAll packets forwarded without examining the transport stream
FirewallsConfigurable destination port on the listener; IP address and port remapping
InteroperabilityOther vendors' SRT-equipped devices

Control and management

Operating systemLinux
DeploymentDVEO appliance or Linux container

Physical

Ethernet2 GigE ports; 4 Ethernet ports optional
Form factorBox (10ch) or rack mount (Rack 25ch, Rack 100ch, Telco 100ch)
PowerRedundant power on the Telco 100ch

Warranty

StandardOne year on every DVEO product
DVCareExtended warranty for 1 to 4 years: priority phone and email support, advance replacement units shipped within 24 hours, firmware notifications with release notes
RepairsEmail rma@dveo.com (or info@dveo.com) for an RMA number; repaired units usually return within a week unless parts are short
RepairableDOZER SRT is on DVEO's list of repairable products

FAQ

DOZER SRT questions

Yes. DOZER interoperates with other vendors' SRT-equipped devices, so a DOZER receiver can sit behind an encoder that is not DVEO's.

Any bitstream: MPEG-2, H.264 or H.265 transport streams, data, and compressed or uncompressed video or audio. DOZER forwards all packets without examining the transport stream.

Yes. Set DOZER up for point-to-multipoint to feed affiliates from one hub. Each receiver can also output UDP to several local devices from its second Ethernet port.

Use SRT caller and listener modes, and set the destination port on the listener to one your firewall allows.

DOZER is available as a Linux container. Ask an engineer for a quote for your deployment.

Count the SRT channels you need now and over the next year. The Box 10ch suits small sites, the Rack 25ch and Rack 100ch suit hubs, and the Telco 100ch adds redundant power.

After the sale

How support works

  • One-year warranty

    Every DVEO product carries a one-year warranty.

  • DVCare, 1 to 4 years

    Extended warranty with priority phone and email support, advance replacement units shipped within 24 hours and firmware notifications with release notes.

  • Repairs and RMA

    Email rma@dveo.com (or info@dveo.com) for an RMA number and ship the unit to San Diego. Repairs usually come back within a week unless parts are short.

  • Spare parts

    Spare parts are available for DVEO products. Ask for the part with the model and serial number.

From the DVEO blog

Further reading

All news and articles

Plan your SRT network with an engineer

Tell us how many channels you carry, where they start and where they land, and DVEO sizes the DOZER units for each end.