File to ASI playout

Loop Source

Unattended playout with no moving parts

Transport stream clips in from a flash card; MPEG-2 or H.264 out on DVB-ASI as SPTS or MPTS at up to 50 Mbps. With no fans or motors, it keeps an alert loop, signage channel or test signal playing as long as it has power.

List price from $1,700

List price in USD. Request a quote for configuration, volume and shipping.

  • DVB-ASI
  • MPEG-2
  • H.264
  • SPTS
  • MPTS
  • CBR
  • VBR
DVEO LOOP SOURCE TS TO ASI, three-quarter view illustrationLOOP SOURCETS TO ASIPWRCARDASICF CARDASI OUT
maximum output bit rate
50Mbps
flash memory card, maximum
4GB
fanless, motorless design
0fans

Overview

A playout source that does one job

Loop Source is a transport stream clip server for places where a full playout system is more than the job needs. Build a local library of clips on a flash memory card, and Loop Source plays them out continuously on DVB-ASI, with no fans or motors and a low power draw.

It serves as an emergency playout server for alerts and critical messages, a digital signage source for trade shows and advertising displays, a test signal generator at transmitter sites or on the bench, and a stable MPEG source for transmission and loopback tests.

Content changes by swapping the card. Loop Source comes with sample transport streams, the VideoReDo I-frame TS cutting tool and a USB to memory card adapter.

Where it fits

Where Loop Source fits

Loop Source is the simplest playout path, with a card in and ASI out.

Loop Source file playout: MPEG-2 or H.264 transport stream clips, HD or SD, are cut on a PC with the included VideoReDo tool and copied through the USB adapter to a flash memory card of up to 4 GB. Loop Source plays the clips from the card in a continuous loop, as SPTS or MPTS at up to 50 Mbps, and outputs DVB-ASI to a modulator, a multiplexer or a CTDK. The modulator feeds a transmitter or coax plant over RF, the multiplexer adds the program to an MPTS for the headend or uplink, and the CTDK converts ASI to UDP or RTP for the IP network.1CLIPS ON A FLASH CARDUSBYour PCVideoReDoTS cutterTSFlash cardUp to 4 GB,swap to update2LOOP SOURCE PLAYS OUTDVB-ASISPTS OR MPTSCBR, VBR, 50 MBPSLoop SourceMPEG-2, H.264 TS3ASI TO MODULATOR, MUX OR CTDKORORModulatorASI in, RF outMultiplexerAdds it to an MPTSCTDKASI to IP, 1 ms4ON AIR, HEADEND OR IPRFASI, MPTSUDP, RTPPRO-MPEG FECTransmitterOn air, or coaxto TVsHeadend, uplinkProgram in the MPTSIP networkUnicast orIGMP multicastRF, ASIIPFILESDVEO PRODUCTTHIRD PARTY
Clips on a flash card play out of Loop Source on DVB-ASI to a modulator, a multiplexer or a CTDK, and on to a transmitter, a headend or an IP network. The playout and FAST solution covers playout with schedules, graphics and ad triggers.
  1. Stage 1: Clips on a flash card

    Cut MPEG-2 or H.264 transport stream clips, HD or SD, on a PC with the included VideoReDo tool and copy them through the USB adapter to a flash card of up to 4 GB. Swap the card to change content.

  2. Stage 2: Loop Source plays out

    Loop Source plays the clips from the card in a continuous loop, as SPTS or MPTS, at constant or variable bit rate up to 50 Mbps, for as long as it has power.

  3. Stage 3: ASI to modulator, mux or CTDK

    The DVB-ASI output feeds a modulator, a multiplexer or a CTDK, which carries the stream onto IP with 1 ms of latency.

  4. Stage 4: On air, headend or IP

    The modulator drives a transmitter or a coax plant, the multiplexer adds the program to an MPTS for the headend or an uplink, and CTDK sends UDP or RTP with Pro-MPEG FEC to unicast or IGMP multicast networks.

Solutions that use Loop Source

Model

Loop Source

One model. Request a quote for the units you need.

  • Available
    DVEO LOOP SOURCE TS TO ASI, front panel close-up illustrationLOOP SOURCETS TO ASICF CARDASI OUT

    Loop Source

    Transport stream loop playout to DVB-ASI

    List price$1,700USD

    • MPEG-2 and H.264 TS to DVB-ASI
    • Up to 50 Mbps, CBR or VBR
    • Fanless, flash card up to 4 GB

Specifications

Loop Source specifications

Inputs

MediaFlash memory card, up to 4 GB
FormatsMPEG-2 and H.264/AVC transport streams, HD and SD

Outputs

InterfaceDVB-ASI
StreamsSPTS and MPTS
Bit rateUp to 50 Mbps, CBR or VBR

Control and management

UpdatesField upgradeable by card swap
IncludedSample transport streams, VideoReDo I-frame TS cutting tool, USB to memory card adapter

Physical

CoolingFanless, motorless
PowerLow power draw

Warranty

StandardOne year on every DVEO product
DVCareExtended warranty for 1 to 4 years: priority phone and email support, advance replacement units shipped within 24 hours, firmware notifications with release notes
RepairsEmail rma@dveo.com (or info@dveo.com) for an RMA number; repaired units usually return within a week unless parts are short

FAQ

Loop Source questions

DVB-ASI, carrying SPTS or MPTS at up to 50 Mbps.

Copy new clips to the flash memory card and swap it in. A USB to memory card adapter is included.

MPEG-2 and H.264/AVC transport streams in HD or SD, at constant or variable bit rate.

It has no fans or motors and plays from onboard flash memory, so there is little to maintain.

When you need schedules, live switching, graphics or ad triggers, look at the DVEO Pro Playout Server.

After the sale

How support works

  • One-year warranty

    Every DVEO product carries a one-year warranty.

  • DVCare, 1 to 4 years

    Extended warranty with priority phone and email support, advance replacement units shipped within 24 hours and firmware notifications with release notes.

  • Repairs and RMA

    Email rma@dveo.com (or info@dveo.com) for an RMA number and ship the unit to San Diego. Repairs usually come back within a week unless parts are short.

  • Spare parts

    Spare parts are available for DVEO products. Ask for the part with the model and serial number.

From the DVEO blog

Further reading

All news and articles

Need a different playout source?

Tell us what has to play, where it goes and for how long, and DVEO matches the playout option.