SRT contribution and distribution

SRT contribution, distribution and IP gateways over the public internet

DOZER SRT gateways recover lost packets, absorb jitter and reorder packets on links you do not control, then hand clean UDP unicast or multicast to your headend. Traffic between units is AES-128 encrypted. Brutus adds protocol conversion when a stream has to change format on the way.

  • SRT
  • Caller
  • Listener
  • AES-128
  • UDP unicast
  • UDP multicast
  • RTMP
  • HLS
DVEO DOZER SRT RACK 100CH, three-quarter view illustrationDOZER SRTRACK 100CHPWRSRTNETGBE1234
SRT streams on a DOZER SRT Rack 100ch or Telco 100ch
100ch
Encryption between DOZER units
AES-128
Ethernet ports per unit, 4 ports optional
2GigE
DOZER SRT Box 10ch list price
$1,995

Why SRT

Live video on networks you do not control

Satellite transponders and leased circuits are expensive and slow to add. The public internet reaches every affiliate, venue and cloud region, but it drops, delays and reorders packets, and plain UDP has no way to recover them.

SRT runs over UDP and adds selective retransmission inside a latency window you set. The receiver asks again only for the packets that went missing, and late packets are put back in order before the stream leaves the buffer. Short, stable paths can run a small buffer. Long or lossy paths get a larger one.

DOZER SRT gateways put SRT at both ends of the link as appliances. Each unit can send, receive or both, point to point or point to multipoint, and forwards the transport stream without examining it, so MPEG-2, H.264, H.265, data or audio pass through untouched.

When the stream itself has to change, Brutus works as an IP gateway. It ingests UDP, RTP, RTMP, SRT or RTSP and outputs HLS, DASH, RTMP, SRT or UDP, with optional transcoding on the way.

Signal path

From the venue encoder to the headend over SRT

A contribution link with a DOZER pair. The same pair works in the other direction for distribution, and one hub DOZER can feed many affiliates.

SRT transport: a camera feeds Premio, or any encoder with UDP output feeds the sending DOZER SRT, which runs as the SRT caller and carries the stream over the public internet with AES-128 encryption and retransmission of lost packets to the receiving DOZER SRT listener at the studio. The listener hands off UDP to the headend network, to D-Streamer for SDI, or to Brutus to continue as SRT or HLS.VENUEPUBLIC INTERNETSTUDIO, HEADEND1ENCODE AT THE SOURCESDICameraSDIPremioSDI to IPAny encoderUDP output2DOZER SENDSOVER SRTUDPUDPDOZER SRTSenderCALLER3PUBLIC INTERNETSRTAES-128LOST PACKETS RESENTLOSS REPORTS4DOZERRECEIVESLISTENERPORTDOZER SRTReceiverLISTENER5HAND OFF OVER UDPUDPUDPUDPSDIHeadend LANUDP multicastD-StreamerIP to SDIBrutusTranscodeSwitcherSDIOnwardSRT, HLSSDIIPDELIVERYCONTROLDVEO PRODUCTTHIRD PARTY
An encoded transport stream from a venue encoder is carried by a DOZER SRT sender across the public internet to a DOZER SRT receiver, which outputs UDP unicast or multicast to the headend.
  1. Stage 1: Encode at the source

    Premio, Brutus or any encoder with UDP output produces the transport stream: MPEG-2, H.264 or H.265, SPTS or MPTS.

  2. Stage 2: DOZER sends over SRT

    The sending DOZER wraps the stream in SRT, encrypts it with AES-128 and connects as caller or listener. A configurable listener port eases firewall traversal.

  3. Stage 3: Public internet

    SRT retransmits only the lost packets inside the latency window you set, absorbs jitter and reorders packets that arrive out of sequence.

  4. Stage 4: DOZER receives

    The receiving DOZER rebuilds and decrypts the stream. It works with other vendors' SRT devices, so the sender does not have to be DVEO.

  5. Stage 5: Hand off over UDP

    Clean UDP unicast or multicast goes to the headend, a Brutus transcoder or a D-Streamer decoder. A second Ethernet port can feed many devices on the local network.

Capabilities

What a DOZER link does

  • Packet loss recovery

    Corrects packet loss, internet jitter and packet reordering on wired and wireless IP links, including Metro WDM and long-haul backbones.

  • AES-128 between units

    Underlying traffic is encrypted with AES-128 from one DOZER to the other.

  • Unicast and multicast

    UDP unicast or multicast in, out or both, plus local UDP output to many devices from a second Ethernet port.

  • Point to multipoint

    Run a point to point pair, or set a hub DOZER to feed many affiliates. Each unit can be a sender, a receiver or both.

  • Transparent forwarding

    Every packet is forwarded without inspecting the transport stream, so compressed or uncompressed video, audio and data all pass.

  • Firewall traversal

    Caller and listener modes, a configurable listener port and remapping of IP addresses and ports fit DOZER into networks you do not run.

  • Linux container option

    DOZER is also available as a Linux container for deployment on your own servers.

  • Telco model

    The DOZER SRT Telco 100ch adds redundant power for hub sites carrying many channels.

  • Protocol conversion

    Where the stream must change protocol or codec, Brutus converts between UDP, RTP, RTMP, SRT, RTSP, HLS and DASH and can transcode on the way.

What you need

Products on an SRT link

DOZER carries the stream. Premio and D-Streamer put SDI on either end, and Brutus converts protocols.

DVEO DOZER SRT RACK 100CH, front panel close-up illustrationDOZER SRTRACK 100CHGBE1234

SRT gateways, 10 to 100 channels

DOZER SRT

Box 10ch, Rack 25ch, Rack 100ch and Telco 100ch. AES-128, caller and listener, point to point or point to multipoint.

List price from $1,995

DVEO BRUTUS IP GATEWAY, front panel close-up illustrationBRUTUSIP GATEWAYPWRSYSNETGBE123410GUSBBRUTUSSYSTEM OK

IP gateway and transcoder

Brutus

Ingest RTP, RTMP, SRT, RTSP or UDP and output HLS, DASH, RTMP, SRT or UDP, with optional transcoding.

Price on request

DVEO PREMIO SDI TO IP, front panel close-up illustrationPREMIOSDI TO IPSDI IN1234

SDI to SRT encoder

Premio

Encodes SDI to MPEG-2, H.264 or H.265 and sends SRT, RTMP or UDP directly from the venue or studio.

List price from $2,495

DVEO D-STREAMER IP TO SDI, front panel close-up illustrationD-STREAMERIP TO SDISDI OUT1234

SRT to SDI decoder

D-Streamer

Receives SRT, UDP, HLS, RTSP or RTMP and outputs SDI with embedded audio for control rooms and transmitters.

List price from $1,795

DOZER SRT models

Channel counts by model

Every model shares the same SRT feature set: AES-128, caller and listener, unicast and multicast, point to point or point to multipoint.

Channel counts by model
ModelSRT channelsForm factorEthernetList price (USD)
DOZER SRT Box 10ch10Box2 GigE, 4 ports optional$1,995
DOZER SRT Rack 25ch25Rack2 GigE, 4 ports optional$2,495
DOZER SRT Rack 100ch100Rack2 GigE, 4 ports optional$3,495
DOZER SRT Telco 100ch100Rack, redundant power2 GigE, 4 ports optional$4,995

Clearance units, the DOZER SRT Box 1ch and a refurbished Rack 10ch, are listed on the clearance page.

FAQ

SRT transport questions

Yes. DOZER interoperates with other vendors' SRT devices, so a DOZER receiver can sit behind an encoder the venue brings, and a DOZER sender can feed a third-party SRT decoder.

Not today. With DVEO hardware, path diversity means two encoders on two separate uplinks, each sending its own SRT stream, with the switch made at the receiver. Each feed is a complete, independent chain, which keeps failure analysis simple.

SRT latency is the receive buffer that leaves time for retransmissions. Short, stable paths can run a small buffer. Long-haul or lossy paths need a larger one to absorb jitter and resend lost packets. Measure round trip time and loss on the real path, then set it from those numbers.

Yes. Configure it for point to multipoint distribution from a central hub to affiliates. Each receiver can also output UDP to many devices on its local network through a second Ethernet port.

For point to point links and hub to affiliate distribution, DOZER units at each endpoint replace satellite backhaul and dedicated lines. A DOZER pair also works as a backup to a dedicated IP link, including a studio to transmitter link.

From the DVEO blog

Further reading

All news and articles

Plan your SRT links with an engineer

Tell us the sites, channel counts and the networks between them. We will size the DOZER units and the receive side.