RF to IP

ATSC, QAM, DVB-S/S2 and DVB-T/T2 to IP

Brutus receives ATSC, QAM, DVB-S/S2 and DVB-T/T2, selects the services you want from each multiplex and transcodes them to H.264 or H.265 for UDP, HLS, DASH, RTMP or SRT. T-Ramp IRDs add BISS and CAM descrambling for encrypted satellite feeds.

  • ATSC 1.0 (8VSB)
  • QAM
  • DVB-S/S2
  • DVB-T/T2
  • BISS
  • UDP multicast
  • HLS
  • SRT
DVEO BRUTUS ATSC QAM, three-quarter view illustrationBRUTUSATSC QAMPWRSYSNETHDDGBE123410GRF IN ATSC/QAM1234BRUTUSSYSTEM OK
RF standards in: ATSC, QAM, DVB-S/S2, DVB-T/T2
4
Unicast or multicast IP outputs per T-Ramp
32
Maximum T-Ramp IP output bit rate
70Mbps
CTDK ASI to IP conversion latency
1ms

Why receive RF on IP

Getting broadcast RF onto an IP network

Channels still arrive as RF: satellite transponders in DVB-S or DVB-S2, terrestrial multiplexes in ATSC or DVB-T/T2, and cable lineups in QAM. A rack of consumer receivers with HDMI outputs does not scale, cannot be monitored centrally and drops captions, audio tracks and program data along the way.

Brutus RF to IP transcoders take the RF in directly. Each tuner demodulates a full multiplex to an MPEG transport stream. Brutus selects and remaps the programs you want and transcodes them to H.264 or H.265 for IP delivery: UDP multicast for IPTV, HLS and DASH for OTT, RTMP or SRT for partners. EPG data travels with the channels.

Where the feed is encrypted or needs a professional IRD, T-Ramp receives DVB-S/S2, decrypts BISS-1 or BISS-E, takes conditional access modules in two CI slots, and re-multiplexes to as many as 32 IP streams or to ASI. Existing ASI equipment joins the IP network through a CTDK converter.

Signal path

From antenna and dish to IP channels

One RF input carries a whole multiplex. These are the steps that turn it into individual IP channels.

RF to IP: a satellite dish, an off-air antenna and a cable feed bring DVB-S/S2, ATSC, DVB-T/T2 and QAM into a T-Ramp IRD and Brutus RF tuners, which demodulate full transport streams; programs are selected and remapped with their EPG, captions and audio, Brutus transcodes them to H.264 or H.265, and the channels leave as UDP or RTP multicast, HLS and DASH, and RTMP or SRT.1RF INDish, LNBDVB-S/S2AntennaATSC, DVB-T/T2Cable feedQAM2DEMODULATEL-BANDT-Ramp IRDBISS, CAM descrambleBrutus RFTuner inputs3SELECT AND MAPMPTSTSProgram mapPIDs, EPG,captions, audio4TRANSCODESPTSBrutusH.264, H.2655DELIVER OVER IPUDP MULTICASTHLS, DASHSRT, RTMPSet-top boxesUDP, RTP multicastApps, playersHLS, DASHPartners, cloudRTMP, SRTRFIPDELIVERYDVEO PRODUCTSERVICETHIRD PARTY
Satellite, terrestrial and cable RF is demodulated to MPEG transport streams, programs are selected and remapped, transcoded to H.264 or H.265, and delivered as UDP multicast, HLS, DASH, RTMP or SRT.
  1. Stage 1: RF in

    A dish and LNB for DVB-S/S2, an antenna for ATSC or DVB-T/T2, or a cable feed for QAM, connected to Brutus RF inputs or a T-Ramp IRD.

  2. Stage 2: Demodulate

    Each tuner locks to a transponder, channel or multiplex and outputs the full MPEG transport stream. T-Ramp descrambles BISS and CAM protected services at this point.

  3. Stage 3: Select and map

    Brutus picks the programs you need from the multiplex, remaps them into your channel lineup, and keeps EPG data and captions with each program.

  4. Stage 4: Transcode

    Brutus converts each program to H.264 or H.265, as one profile or an ABR ladder, with GPU or CPU acceleration.

  5. Stage 5: Deliver over IP

    Brutus outputs UDP or RTP multicast to set-top boxes, HLS and DASH to apps, and RTMP or SRT to partners and cloud platforms. CTDK bridges any ASI equipment that stays in the chain.

Capabilities

What the RF to IP chain handles

  • Four RF standards

    ATSC and QAM, DVB-S and DVB-S2, DVB-T and DVB-T2 inputs on the Brutus RF to IP versions.

  • Many channels per tuner

    Extract multiple TV and radio services from one transponder or multiplex, instead of one receiver per channel.

  • Channel mapping and EPG

    Filter and remap services into your lineup and carry electronic program guide data to IPTV and OTT platforms.

  • BISS and CAM descrambling

    T-Ramp decrypts BISS-1 and BISS-E and takes CAMs for Conax, Irdeto, Viaccess, NDS, Mediaguard, Cryptoworks, SECA and other systems.

  • H.264 or H.265 out

    Transcode to the codec your receivers use, one profile or multi-bitrate, with GPU or CPU acceleration.

  • Multicast, HLS, DASH, SRT

    Output UDP, RTP, HLS, DASH, RTMP and SRT for IPTV networks, OTT apps and partners.

  • Captions and subtitles

    608/708 closed captions, DVB subtitles and teletext stay with the channel. T-Ramp also handles VBI teletext and EBU subtitles.

  • ASI where you still need it

    T-Ramp re-multiplexes to IP or ASI. CTDK converts ASI to IP and back with Pro-MPEG FEC and IGMPv2/v3 multicast.

  • Web UI and API

    Manage tuners, channels and outputs in the browser, or automate with the Brutus REST API. T-Ramp adds a front-panel LCD for local control.

What you need

Products in an RF to IP headend

Brutus covers reception and transcoding in one server. T-Ramp, CTDK and DVB Master cover IRD, ASI and descrambling jobs.

DVEO BRUTUS RF TO IP, front panel close-up illustrationBRUTUSRF TO IPPWRSYSNETGBE123410GRF IN1234BRUTUSSYSTEM OK

RF to IP transcoder

Brutus RF to IP

ATSC, QAM, DVB-S/S2 or DVB-T/T2 in. Programs selected, remapped and transcoded to H.264 or H.265 for UDP, HLS, DASH, RTMP and SRT.

Price on request

DVEO T-RAMP DVB-S/S2 IRD, front panel close-up illustrationT-RAMPDVB-S/S2 IRDRF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK

DVB-S/S2 integrated receiver decoder

T-Ramp

MPEG-2 and H.264 IRD with BISS-1 and BISS-E, two CI slots, re-multiplexing to IP or ASI and up to 32 IP output streams. The ATSC model is currently unavailable.

List price from $2,995

DVEO CTDK ASI / IP, front panel close-up illustrationCTDKASI / IPPWRASIIPASI INASI OUTIP

ASI to IP and IP to ASI

CTDK

Bidirectional conversion of MPEG-2 or H.264 SPTS and MPTS, 1 ms ASI to IP, Pro-MPEG FEC and IGMPv2/v3.

List price from $1,795

DVEO DVB MASTER ASI PCIE, front panel close-up illustrationDVB MASTERASI PCIEFPGA

PCIe ASI cards

DVB Master

Low profile DVB-ASI capture and playback cards for servers, 213 Mbps payload, PID filtering and packet timestamping.

List price from $495

Formats

RF, ASI and IP support by product

Published specifications only. An empty cell means the feature is not part of that product's specification.

RF, ASI and IP support by product
ProductATSCQAMDVB-S/S2DVB-T/T2BISS / CAMASIUDP multicastHLS / DASHSRT
Brutus RF to IPSupportedSupportedSupportedSupportedNot listedNot listedSupportedSupportedSupported
T-RampNot listedNot listedSupportedNot listedSupportedin/outSupportedNot listedNot listed
CTDKNot listedNot listedNot listedNot listedNot listedin/outSupportedNot listedNot listed
DVB MasterNot listedNot listedNot listedNot listedNot listedin/outNot listedNot listedNot listed

The T-Ramp ATSC model is currently unavailable. For ATSC reception, use Brutus with ATSC inputs.

FAQ

RF to IP questions

Yes. A tuner demodulates a whole transponder or multiplex, and Brutus extracts multiple TV and radio services from it. Tell us how many transponders and multiplexes you need to receive and we will configure the inputs.

T-Ramp decrypts BISS-1 and BISS-E and has two CI slots for conditional access modules for Conax, Irdeto, Viaccess, NDS, Mediaguard and other systems. CAMs and entitlements come from the content provider.

Not at the moment. The DVB-S/S2 T-Ramp is the version available to order. For ATSC reception, use Brutus with ATSC inputs, or ask us about availability.

Yes. T-Ramp re-multiplexes to ASI as well as IP, and CTDK converts any ASI transport stream to IP and back, so modulators and multiplexers that expect ASI keep working.

Map your RF lineup to IP

Send the satellites, transponders and off-air channels you receive and the outputs you need. We will configure the tuners, IRDs and transcoding.