Live encoding and transcoding

Live encoding and transcoding to MPEG-2, H.264, H.265 and AV1

Brutus takes IP, SDI or RF sources and transcodes them in real time to MPEG-2, H.264, H.265 or AV1, as a single profile or a multi-bitrate ladder for HLS and DASH. Premio encodes SDI at the edge of the plant. Run Brutus on DVEO hardware or as Brutus Cloud.

  • MPEG-2
  • H.264
  • H.265
  • AV1
  • AAC
  • AC-3
  • SRT
  • UDP multicast
DVEO BRUTUS MEDIA SERVER, three-quarter view illustrationBRUTUSMEDIA SERVERPWRSYSNETHDDGBE123410GUSBBRUTUSSYSTEM OK
Output video codecs: MPEG-2, H.264, H.265 and AV1
4
Closed captions carried through the transcode
608/708
Premio SDI encoder sizes
1, 4, 8ch
Single and multiple program transport streams
SPTS/MPTS

One source, many codecs

Every distribution leg wants a different codec

A channel rarely has one destination. A cable plant still feeds MPEG-2 set-top boxes. An IPTV network runs H.264 over UDP multicast. OTT apps want an H.264 or H.265 ladder in HLS and DASH, and newer players can take AV1 at lower bitrates. A separate encode chain for each leg multiplies hardware, failure points and monitoring.

Brutus transcodes one ingest to several codecs and resolutions in the same pass. The same source becomes an MPEG-2 feed for legacy receivers, an H.264 feed for broad compatibility and an H.265 or AV1 ladder where bandwidth is tight. Each output runs with its own configuration, as a single profile or as a multi-bitrate set for adaptive streaming.

Where the source is SDI, a Premio encoder converts it to MPEG-2, H.264 or H.265 over UDP, RTMP or SRT, with embedded audio, multiple audio tracks and closed captions intact. The Premio output goes straight to its destination or into Brutus for more renditions.

Signal path

Where live encoding sits in a headend

Six stages, from the feed you receive to the screen that decodes it. Encoding is stage 2, and the codec, GOP and bitrate chosen there carry through every stage after it.

Inside a DVEO headend: satellite, off-air, cable, IP and studio sources are received by T-Ramp and Brutus RF, encoded by Premio and transcoded by Brutus, carried between sites by DOZER SRT over the public internet, marked with SCTE-35 and given local ads and graphics by Channel Manager, delivered from the Brutus origin as HLS and DASH and as UDP multicast, and decoded by D-Streamer, set-top boxes and players.1RECEIVEL-BANDSatelliteDVB-S/S2Off-airATSC, DVB-T2CableQAMIP feedsSRT, RTMPStudioSDIT-RampSatellite IRDBrutus RFRF to IP2ENCODE ANDTRANSCODESRTSDIUDPBrutusTranscode, ABRPremioSDI to IPPUBLICINTERNET3TRANSPORTUDPUDPDOZER SRTAES-128, ARQ4MONETIZESRTSRTBrutusSCTE-35 markersChannelManagerAds, graphics5DELIVERHLSUDPBrutusOriginMulticastIGMP6DECODEHLSUDPUDPPlayersWeb, apps, TVD-StreamerIP to SDISet-top boxesUDP multicastSDIRFIPDELIVERYDVEO PRODUCTTHIRD PARTY
Satellite, off-air, SDI and IP sources pass through encoding, SRT transport, SCTE-35 signaling and delivery to set-top boxes, players and SDI decoders.
  1. Stage 1: Receive

    Satellite, terrestrial and cable RF arrives through T-Ramp IRDs or Brutus RF inputs. SDI comes from the studio, and IP feeds arrive over UDP, SRT, RTMP or HLS.

  2. Stage 2: Encode and transcode

    Premio encodes SDI. Brutus transcodes IP and RF sources to MPEG-2, H.264, H.265 or AV1, one profile or an ABR ladder, with 608/708 captions carried through.

  3. Stage 3: Transport

    DOZER SRT gateways carry the encoded streams between sites over the public internet, with packet loss recovery and AES-128 encryption.

  4. Stage 4: Monetize

    SCTE-35 markers pass through or are inserted, and Brutus writes them into HLS and DASH manifests for server-side ad insertion. Channel Manager adds ads and graphics on SCTE-35 cues.

  5. Stage 5: Deliver

    Brutus sends UDP multicast to IPTV set-top boxes and serves HLS and DASH from its origin to CDNs, apps and smart TVs.

  6. Stage 6: Decode

    D-Streamer decodes UDP, SRT, HLS, RTSP or RTMP back to SDI for a control room, a transmitter or a return feed.

Capabilities

What the encode stage handles

Brutus capabilities apply on DVEO hardware and in Brutus Cloud unless noted.

  • Four output codecs

    MPEG-2, H.264, H.265 and AV1 video with AAC, AC-3 or MPEG audio. A legacy feed and an efficient ABR ladder can come from the same ingest.

  • One profile or a ladder

    Produce a single profile for contribution or IPTV, or several resolutions and bitrates for HLS and DASH players, in the same pass.

  • Captions survive

    608/708 closed captions, DVB subtitles and teletext pass through the transcode instead of being dropped.

  • Input failover

    Brutus switches to a backup input automatically when the primary source drops.

  • SPTS or MPTS

    Build single program or multiple program transport streams for UDP unicast or multicast distribution.

  • SCTE-35 in the output

    Insert SCTE-35 ad markers into the HLS or DASH manifest or into the UDP transport stream output.

  • Web UI and REST API

    Set up channels in the browser, or drive them from your own tooling over the REST API.

  • CPU or GPU

    Brutus uses GPU and CPU acceleration where available. Hardware is sized to channel count, codec and concurrency.

  • On premises or in the cloud

    Brutus runs on DVEO servers you install. Brutus Cloud runs the same transcoding engine as elastic capacity with hosting and bandwidth included.

What you need

Products in a live encoding chain

Brutus does the transcoding, Premio and D-Streamer handle the SDI edges, and T-Ramp and DOZER SRT feed the chain.

DVEO BRUTUS MEDIA SERVER, front panel close-up illustrationBRUTUSMEDIA SERVERPWRSYSNETGBE123410GUSBBRUTUSSYSTEM OK

Live and VOD media server

Brutus

IP, SDI and RF in. MPEG-2, H.264, H.265 and AV1 out over HLS, DASH, SRT, RTMP, RTSP and UDP, with DVR, DRM and SCTE-35.

Price on request

Brutus Cloud dashboard with an ABR ladder and a delivery map, illustrationABR LADDERNEWS HD1080pH.2651080pH.264720pH.264540pH.264360pH.264DELIVERYORIGINOUTPUTSHLSDASHSRTUDP MULTICASTSCTE-35DRMWIDEVINEFAIRPLAYPLAYREADYFAILOVER READYBRUTUS CLOUD

Hosted transcoding

Brutus Cloud

The Brutus transcoding engine as elastic capacity. SRT, RTMP or HLS in; H.264, H.265 or AV1 ladders out to SRT, RTMP, HLS and DASH.

Price on request

DVEO PREMIO SDI TO IP, front panel close-up illustrationPREMIOSDI TO IPSDI IN1234

SDI to IP encoder

Premio

1, 4 or 8 SDI channels to MPEG-2, H.264 or H.265 over UDP, RTMP or SRT. Closed captions, multiple audio tracks, DTMF tones to SCTE-35. Linux with a web UI.

List price from $2,495

DVEO D-STREAMER IP TO SDI, front panel close-up illustrationD-STREAMERIP TO SDISDI OUT1234

IP to SDI decoder

D-Streamer

Decodes UDP, SRT, HLS, RTSP or RTMP to SDI in 1, 4 or 8 channels, or 4K UHD to 12G-SDI. Closed captions and multiple audio tracks kept.

List price from $1,795

DVEO DOZER SRT BOX 10CH, front panel close-up illustrationDOZER SRTBOX 10CHGBE12

Transport between sites

DOZER SRT

Carries encoded streams over the public internet with packet loss recovery and AES-128, 10 to 100 channels per unit.

List price from $1,995

DVEO T-RAMP DVB-S/S2 IRD, front panel close-up illustrationT-RAMPDVB-S/S2 IRDRF INCI SLOTS12DVB-S2 QPSKSIGNAL LOCK

Satellite receive

T-Ramp

DVB-S/S2 IRD with BISS-1 and BISS-E and two CI slots, re-multiplexing to IP or ASI for the encode stage.

List price from $2,995

Formats

Codecs and protocols by product

Published specifications for each product. Labels show direction where a product only receives or only outputs a format.

Codecs and protocols by product
ProductMPEG-2H.264H.265AV1SDISRTRTMPHLS / DASHUDP
BrutusSupportedSupportedSupportedSupportedinSupportedSupportedSupportedSupported
Brutus CloudinSupportedSupportedSupportedNot listedSupportedSupportedSupportedSupported
PremioSupportedSupportedSupportedNot listedinSupportedSupportedNot listedSupported
D-StreamerdecodedecodedecodeNot listedoutininHLS inin/out

Brutus Cloud accepts MPEG-2 input and encodes H.264, H.265 or AV1. The D-Streamer 4K 12G-SDI model decodes H.264 and H.265 and also accepts NDI. UDP output on D-Streamer is a feature of the Linux version, alongside SDI on the same channel.

FAQ

Live encoding questions

Use H.264 where the receivers are mixed or older, since almost every device decodes it. H.265 and AV1 deliver comparable quality at lower bitrates, which matters on constrained links and large ABR ladders, but only on devices that decode them. Brutus can output both from one ingest, so H.264 and a more efficient codec can run side by side.

Yes. MPEG-2 output is there for older set-top boxes and cable systems, next to H.264, H.265 and AV1 outputs for newer receivers.

It depends on input and output codecs, resolutions, the number of ABR renditions and whether GPUs are fitted. DVEO announced IP transcoder configurations from 10 to 240 channels in July 2024. Send us your channel list and we will size the server.

Not always. GPUs pay off at high channel counts, for full ABR ladders and when AI workloads share the server. A single low-density channel with strict quality targets can cost less on CPU. We size the hardware per workload: channel count, codec and concurrency.

Both run the same transcoding engine. Brutus runs on hardware you own, inside your network. Brutus Cloud is elastic capacity with hosting and bandwidth included, and DVEO can operate it for you. A common split is steady channels on Brutus and event peaks in Brutus Cloud.

From the DVEO blog

Further reading

All news and articles

Send us your channel list

List your sources, codecs and destinations. An engineer will size Brutus or Premio for it and send a quote.