SRT gateways, 10 to 100 channels
DOZER SRT
Box 10ch, Rack 25ch, Rack 100ch and Telco 100ch. AES-128, caller and listener, point to point or point to multipoint.
List price from $1,995
SRT contribution and distribution
DOZER SRT gateways recover lost packets, absorb jitter and reorder packets on links you do not control, then hand clean UDP unicast or multicast to your headend. Traffic between units is AES-128 encrypted. Brutus adds protocol conversion when a stream has to change format on the way.
Why SRT
Satellite transponders and leased circuits are expensive and slow to add. The public internet reaches every affiliate, venue and cloud region, but it drops, delays and reorders packets, and plain UDP has no way to recover them.
SRT runs over UDP and adds selective retransmission inside a latency window you set. The receiver asks again only for the packets that went missing, and late packets are put back in order before the stream leaves the buffer. Short, stable paths can run a small buffer. Long or lossy paths get a larger one.
DOZER SRT gateways put SRT at both ends of the link as appliances. Each unit can send, receive or both, point to point or point to multipoint, and forwards the transport stream without examining it, so MPEG-2, H.264, H.265, data or audio pass through untouched.
When the stream itself has to change, Brutus works as an IP gateway. It ingests UDP, RTP, RTMP, SRT or RTSP and outputs HLS, DASH, RTMP, SRT or UDP, with optional transcoding on the way.
Signal path
A contribution link with a DOZER pair. The same pair works in the other direction for distribution, and one hub DOZER can feed many affiliates.
Premio, Brutus or any encoder with UDP output produces the transport stream: MPEG-2, H.264 or H.265, SPTS or MPTS.
The sending DOZER wraps the stream in SRT, encrypts it with AES-128 and connects as caller or listener. A configurable listener port eases firewall traversal.
SRT retransmits only the lost packets inside the latency window you set, absorbs jitter and reorders packets that arrive out of sequence.
The receiving DOZER rebuilds and decrypts the stream. It works with other vendors' SRT devices, so the sender does not have to be DVEO.
Clean UDP unicast or multicast goes to the headend, a Brutus transcoder or a D-Streamer decoder. A second Ethernet port can feed many devices on the local network.
Capabilities
Corrects packet loss, internet jitter and packet reordering on wired and wireless IP links, including Metro WDM and long-haul backbones.
Underlying traffic is encrypted with AES-128 from one DOZER to the other.
UDP unicast or multicast in, out or both, plus local UDP output to many devices from a second Ethernet port.
Run a point to point pair, or set a hub DOZER to feed many affiliates. Each unit can be a sender, a receiver or both.
Every packet is forwarded without inspecting the transport stream, so compressed or uncompressed video, audio and data all pass.
Caller and listener modes, a configurable listener port and remapping of IP addresses and ports fit DOZER into networks you do not run.
DOZER is also available as a Linux container for deployment on your own servers.
The DOZER SRT Telco 100ch adds redundant power for hub sites carrying many channels.
Where the stream must change protocol or codec, Brutus converts between UDP, RTP, RTMP, SRT, RTSP, HLS and DASH and can transcode on the way.
What you need
DOZER carries the stream. Premio and D-Streamer put SDI on either end, and Brutus converts protocols.
SRT gateways, 10 to 100 channels
Box 10ch, Rack 25ch, Rack 100ch and Telco 100ch. AES-128, caller and listener, point to point or point to multipoint.
List price from $1,995
IP gateway and transcoder
Ingest RTP, RTMP, SRT, RTSP or UDP and output HLS, DASH, RTMP, SRT or UDP, with optional transcoding.
Price on request
SDI to SRT encoder
Encodes SDI to MPEG-2, H.264 or H.265 and sends SRT, RTMP or UDP directly from the venue or studio.
List price from $2,495
SRT to SDI decoder
Receives SRT, UDP, HLS, RTSP or RTMP and outputs SDI with embedded audio for control rooms and transmitters.
List price from $1,795
DOZER SRT models
Every model shares the same SRT feature set: AES-128, caller and listener, unicast and multicast, point to point or point to multipoint.
| Model | SRT channels | Form factor | Ethernet | List price (USD) |
|---|---|---|---|---|
| DOZER SRT Box 10ch | 10 | Box | 2 GigE, 4 ports optional | $1,995 |
| DOZER SRT Rack 25ch | 25 | Rack | 2 GigE, 4 ports optional | $2,495 |
| DOZER SRT Rack 100ch | 100 | Rack | 2 GigE, 4 ports optional | $3,495 |
| DOZER SRT Telco 100ch | 100 | Rack, redundant power | 2 GigE, 4 ports optional | $4,995 |
Clearance units, the DOZER SRT Box 1ch and a refurbished Rack 10ch, are listed on the clearance page.
FAQ
Yes. DOZER interoperates with other vendors' SRT devices, so a DOZER receiver can sit behind an encoder the venue brings, and a DOZER sender can feed a third-party SRT decoder.
Not today. With DVEO hardware, path diversity means two encoders on two separate uplinks, each sending its own SRT stream, with the switch made at the receiver. Each feed is a complete, independent chain, which keeps failure analysis simple.
SRT latency is the receive buffer that leaves time for retransmissions. Short, stable paths can run a small buffer. Long-haul or lossy paths need a larger one to absorb jitter and resend lost packets. Measure round trip time and loss on the real path, then set it from those numbers.
Yes. Configure it for point to multipoint distribution from a central hub to affiliates. Each receiver can also output UDP to many devices on its local network through a second Ethernet port.
For point to point links and hub to affiliate distribution, DOZER units at each endpoint replace satellite backhaul and dedicated lines. A DOZER pair also works as a backup to a dedicated IP link, including a studio to transmitter link.
From the DVEO blog
Streaming and delivery
Streaming and delivery
Company news
Tell us the sites, channel counts and the networks between them. We will size the DOZER units and the receive side.